Typically, routes to remote networks are obtained dynamically through routing protocols. However, the administrator can also seed the routing table by providing routes manually. These routes are referred to as static. A static route is associated with an interface that represents the remote network. Unlike dynamic routes, static routes are retained even if the router is restarted or the interface is disabled.
An autostatic route is obtained through a routing protocol, but once obtained behaves like a static route. The process for obtaining autostatic routes is as follows: The IP or IPX router manager issues a request that a routing protocol update the routing information for a specific interface. The results of the update are then converted into static routes. Note that only certain routing protocols support requests for autostatic route updates.
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
