Windows Communication Foundation (WCF) 实现 Ws-atomic Transaction 和 Ws-coordination 协议。
| 规范/文档 | Version | 链接 |
|---|---|---|
| WS-Coordination | 1.0 1.1 | https://go.microsoft.com/fwlink/?LinkId=96104 https://go.microsoft.com/fwlink/?LinkId=96079 |
| WS-AtomicTransaction | 1.0 1.1 | https://go.microsoft.com/fwlink/?LinkId=96080 https://go.microsoft.com/fwlink/?LinkId=96081 |
这些协议规范需要在两种级别提供互操作性:在应用程序之间和在事务管理器之间(请参见下图)。 规范详细说明两个互操作性级别的消息格式和消息交换。 用于应用程序间交换的特定安全性、可靠性和编码与常规应用程序交换一样适用。 但是,在事务管理器之间的成功互操作还需要特定绑定的协议,因为它通常不由用户进行配置。
本主题说明 WS-Atomic Transaction (WS-AT) 规范与安全性的组合,并说明用于事务管理器间通信的安全绑定。 本文档中介绍的方法已经使用 WS-AT 和 WS-Coordination 的其他实现(包括 IBM、IONA、Sun Microsystems 等)成功进行了测试。
下图描绘了两个事务管理器,事务管理器 1 和事务管理器 2 和两个应用程序,应用程序 1 和 2 应用程序之间的互操作性:
显示管理器的事务之间的交互的屏幕截图。
假设一个典型的 WS-Coordination/WS-Atomic Transaction 方案具有一个发起方 (I) 和一个参与者 (P)。 发起方和参与者都有事务管理器(分别为 ITM 和 PTM)。 两阶段提交在本主题中称为 2PC。
| 1.CreateCoordinationContext | 12.应用程序消息响应 |
| 2.CreateCoordinationContextResponse | 13.提交(完成) |
| 3.注册(完成) | 14.准备 (2PC) |
| 4.RegisterResponse | 15.准备 (2PC) |
| 5.应用程序消息 | 16.已准备 (2PC) |
| 6.使用上下文的 CreateCoordinationContext | 17.已准备 (2PC) |
| 7.注册(持久) | 18.已提交(完成) |
| 8。RegisterResponse | 19.提交 (2PC) |
| 9.CreateCoordinationContextResponse | 20.提交 (2PC) |
| 10.注册(持久) | 21.已提交 (2PC) |
| 11.RegisterResponse | 22.已提交 (2PC) |
本文档说明 WS-AtomicTransaction 规范与安全性的组合,并说明用于事务管理器间通信的安全绑定。 本文档中介绍的方法已经使用 WS-AT 和 WS-Coordination 的其他实现成功进行了测试。
图和表从安全性的角度演示了四种消息类:
-
激活消息(CreateCoordinationContext 和 CreateCoordinationContextResponse)。
-
注册消息(Register 和 RegisterResponse)
-
协议消息(Prepare、Rollback、Commit、Aborted 等)。
-
应用程序消息。
前三种消息类可视为事务管理器消息,本主题后面的“应用程序消息交换”将说明它们的绑定配置。 第四种消息类是应用程序间消息,本主题后面的“消息示例”一节将对它进行说明。 本部分介绍 WCF 为每个类使用的协议绑定。
本文档中使用以下 XML 命名空间和关联的前缀。
| 前缀 | Version | 命名空间 URI |
|---|---|---|
| s11 | https://go.microsoft.com/fwlink/?LinkId=96014 | |
| wsa | Pre 1.0 1.0 | http://www.w3.org/2004/08/addressing https://go.microsoft.com/fwlink/?LinkId=96022 |
| wscoor | 1.0 1.1 | https://go.microsoft.com/fwlink/?LinkId=96078 https://go.microsoft.com/fwlink/?LinkId=96079 |
| wsat | 1.0 1.1 | https://go.microsoft.com/fwlink/?LinkId=96080 https://go.microsoft.com/fwlink/?LinkId=96081 |
| T | Pre-1.3 1.3 | https://go.microsoft.com/fwlink/?LinkId=96082 https://go.microsoft.com/fwlink/?LinkId=96100 |
| o | https://go.microsoft.com/fwlink/?LinkId=96101 | |
| xsd | https://go.microsoft.com/fwlink/?LinkId=96102 |
事务管理器绑定
R1001:参与 WS-AT 1.0 事务的事务管理器必须对 Ws-atomic Transaction 和 Ws-coordination 消息交换使用 SOAP 1.1 和 Ws-addressing 2004/08。
R1002:参与 WS-AT 1.1 事务的事务管理器必须对 Ws-atomic Transaction 和 Ws-coordination 消息交换使用 SOAP 1.1 和 Ws-addressing 2005/08。
应用程序消息并不限于这些绑定,将在后面进行说明。
事务管理器 HTTPS 绑定
事务管理器 HTTPS 绑定仅依赖于传输安全以在事务树中的每个发送方-接收方对之间实现安全性和建立信任。
HTTPS 传输配置
X.509 证书用于建立事务管理器标识。 要求对客户端/服务器进行身份验证,客户端/服务器授权作为实现详细信息保留:
-
R1111:通过网络提供的 X.509 证书必须具有使用者名称相匹配的原始计算机的完全限定的域名 (FQDN)。
-
B1112:DNS 必须 X.509 主题名称检查在系统中每个发送方接收方对成功之间的功能。
激活和注册绑定配置
WCF 要求通过 HTTPS 使用相关的请求/答复双工绑定。 (有关关联的更多信息和请求/答复消息交换模式的说明,请参见 WS-Atomic Transaction,第 8 节。)
2PC 协议绑定配置
WCF 通过 HTTPS 支持单向 (数据报) 消息。 消息中的关联作为实现详细信息保留。
B1131:实现必须支持wsa:ReferenceParametersWS 寻址,若要实现的 WCF 的 2PC 消息的相互关系中所述。
事务管理器混合安全绑定
这是一个备选(混合模式)绑定,它使用传输安全和 WS-Coordination 颁发的令牌模型的组合来实现建立标识的目的。 激活和注册是在两个绑定间存在差异的仅有元素。
HTTPS 传输配置
X.509 证书用于建立事务管理器标识。 要求对客户端/服务器进行身份验证,客户端/服务器授权作为实现详细信息保留。
激活消息绑定配置
激活消息通常不参与互操作,因为他们一般出现在应用程序及其本地事务管理器之间。
B1221:WCF 使用双工 HTTPS 绑定 (中所述消息传递协议) 对激活消息。 使用 WS-Addressing 2004/08(针对 WS-AT 1.0)和 WS-Addressing 2005/08(针对 WS-AT 1.1)关联请求和答复消息。
WS-Atomic Transaction 规范第 8 节更详尽地说明了关联和消息交换模式。
-
R1222:在接收时
CreateCoordinationContext,协调器必须发出SecurityContextToken与关联的机密STx。 在遵循 WS-Trust 规范的t:IssuedTokens标头中返回此令牌。 -
R1223:如果激活出现在现有的协调上下文
t:IssuedTokens标头SecurityContextToken与现有关联上下文必须流上CreateCoordinationContext消息。
一个新t:IssuedTokens标头应为附加到传出生成wscoor:CreateCoordinationContextResponse消息。
注册消息绑定配置
B1231:WCF 使用双工 HTTPS 绑定 (中所述消息传递协议)。 使用 WS-Addressing 2004/08(针对 WS-AT 1.0)和 WS-Addressing 2005/08(针对 WS-AT 1.1)关联请求和答复消息。
WS-AtomicTransaction 第 8 节更详尽地说明了关联和消息交换模式。
R1232:传出wscoor:Register消息必须使用IssuedTokenOverTransport身份验证模式中所述安全协议。
wsse:Timestamp必须使用签名元素SecurityContextToken STx颁发。 此签名是拥有与特定事务关联的令牌的证明,用于对登记事务的参与者进行身份验证。 RegistrationResponse 消息通过 HTTPS 发回。
2PC 协议绑定配置
WCF 通过 HTTPS 支持单向 (数据报) 消息。 消息中的关联作为实现详细信息保留。
B1241:实现必须支持wsa:ReferenceParametersWS 寻址,若要实现的 WCF 的 2PC 消息的相互关系中所述。
应用程序消息交换
只要绑定满足下面的安全要求,应用程序就可以对应用程序间消息随意使用任何特定的绑定:
-
R2001:应用程序的消息必须流经
t:IssuedTokens标头与CoordinationContext消息的标头中。 -
R2002:完整性和保密性
t:IssuedToken必须提供。
CoordinationContext 标头包含 wscoor:Identifier。 尽管的定义xsd:AnyURI允许的绝对和相对 Uri,使用 WCF 支持仅wscoor:Identifiers,它是绝对 Uri。
B2003:如果wscoor:Identifier的wscoor:CoordinationContext是相对 URI,将从事务性 WCF 服务返回错误。
消息示例
CreateCoordinationContext 请求/响应消息
下面的消息遵循请求/响应模式。
使用 WSCoor 1.0 的 CreateCoordinationContext
<s:Envelope>
<s:Header>
<a:Action>http://.../ws/2004/10/wscoor/CreateCoordinationContext</Action>
<a:MessageID>urn:uuid:069f5104-fd88-4264-9f99-60032a82854e</MessageID>
<a:ReplyTo>
<Address>https://...</a:Address>
</a:ReplyTo>
<a:To>https://...</a:To>
<wsse:Security>
<u:Timestamp>
<wsu:Created>2005-12-15T23:36:09.921Z</u:Created>
<wsu:Expires>2005-12-15T23:41:09.921Z</u:Expires>
</u:Timestamp>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wscoor:CreateCoordinationContext>
<wscoor:CoordinationType>...</wscoor:CoordinationType>
</wscoor:CreateCoordinationContext>
</s:Body>
</s11:Envelope>
使用 WSCoor 1.1 的 CreateCoordinationContext
<s:Envelope>
<s:Header>
<a:Action>http://docs.oasis-open.org/ws-tx/wscoor/2006/06/CreateCoordinationContext</Action>
<a:MessageID>urn:uuid:069f5104-fd88-4264-9f99-60032a82854e</MessageID>
<a:ReplyTo>
<Address>https://...</a:Address>
</a:ReplyTo>
<a:To>https://...</a:To>
<wsse:Security>
<u:Timestamp>
<wsu:Created>2005-12-15T23:36:09.921Z</u:Created>
<wsu:Expires>2005-12-15T23:41:09.921Z</u:Expires>
</u:Timestamp>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wscoor:CreateCoordinationContext>
<wscoor:CoordinationType>...</wscoor:CoordinationType>
</wscoor:CreateCoordinationContext>
</s:Body>
</s11:Envelope>
使用 Trust Pre-1.3 和 WSCoor 1.0 的 CreateCoordinationContextResponse
<s:Envelope>
<!-- Data below is shown in the clear for
illustration purposes only. -->
<s:Header>
<a:Action>./ws/2004/10/wscoor/CreateCoordinationContextResponse </a:Action>
<a:RelatesTo>urn:uuid:069f5104-fd88-4264-9f99-60032a82854e</a:RelatesTo>
<a:To s:mustUnderstand="1">https://... </a:To>
<t:IssuedTokens>
<wst:RequestSecurityTokenResponse
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
xmlns:wst="http://schemas.xmlsoap.org/ws/2005/02/trust"
xmlns:wsc="http://schemas.xmlsoap.org/ws/2005/02/sc"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
<wst:TokenType>http://schemas.xmlsoap.org/ws/2005/02/sc/sct</wst:TokenType>
<wst:RequestedSecurityToken>
<wsc:SecurityContextToken>
<wssu:Identifier>
http://fabrikam123.com/SCTi
</wssu:Identifier>
</wsc:SecurityContextToken>
</wst:RequestedSecurityToken>
<wsp:AppliesTo>
http://fabrikam123.com/CCi
</wsp:AppliesTo>
<wst:RequestedAttachedReference>
<wsse:SecurityTokenReference >
<wsse:Reference
ValueType="http://schemas.xmlsoap.org/ws/2005/02/sc/sct"
URI="http://fabrikam123.com/SCTi"/>
</wsse:SecurityTokenReference>
</wst:RequestedAttachedReference>
<wst:RequestedUnattachedReference>
<wsse:SecurityTokenReference>
<wsse:Reference
ValueType="http://schemas.xmlsoap.org/ws/2005/02/sc/sct"
URI="http://fabrikam123.com/SCTi"/>
</wsse:SecurityTokenReference>
</wst:RequestedUnattachedReference>
<wst:RequestedProofToken>
<wst:BinarySecret
Type="http://schemas.xmlsoap.org/ws/2005/02/trust/SymmetricKey">
<!-- base64 encoded value -->
</wst:BinarySecret>
</wst:RequestedProofToken>
<wst:Lifetime>
<wssu:Created>2005-10-24T20:19:26.526Z</wssu:Created>
<wssu:Expires>2005-10-25T06:24:26.526Z</wssu:Expires>
</wst:Lifetime>
<wst:KeySize>256</wst:KeySize>
</wst:RequestSecurityTokenResponse>
</t:IssuedTokens>
<o:Security xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<u:Timestamp u:Id="_0">
<u:Created>2005-12-15T23:36:12.015Z</u:Created>
<u:Expires>2005-12-15T23:41:12.015Z</u:Expires>
</u:Timestamp>
</o:Security>
</s:Header>
<s:Body>
<wscoor:CreateCoordinationContextResponse>
<wscoor:CoordinationContext>
<wscoor:Identifier>
http://fabrikam123.com/CCi
</wscoor:Identifier>
<wscoor:Expires>...</wscoor:Expires>
<wscoor:CoordinationType>...</wscoor:CoordinationType>
<wscoor:RegistrationService>
<a:Address>https://...</a:Address>
<a:ReferenceParameters>
...
</a:ReferenceParameters>
</wscoor:RegistrationService>
</wscoor:CoordinationContext>
</wscoor:CreateCoordinationContextResponse>
</s:Body>
</s:Envelope>
使用 Trust 1.3 和 WSCoor 1.1 的 CreateCoordinationContextResponse
<s:Envelope>
<!-- Data below is shown in the clear for illustration purposes only. -->
<s:Header>
<a:Action>http://docs.oasis-open.org/ws-tx/wscoor/2006/06/CreateCoordinationContextResponse </a:Action>
<a:RelatesTo>urn:uuid:069f5104-fd88-4264-9f99-60032a82854e</a:RelatesTo>
<a:To s:mustUnderstand="1">https://... </a:To>
<t:IssuedTokens>
<wst:RequestSecurityTokenResponse
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
xmlns:wst="http://docs.oasis-open.org/ws-sx/ws-trust/200512"
xmlns:wsc="http://schemas.xmlsoap.org/ws/2005/02/sc"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
<wst:TokenType>http://schemas.xmlsoap.org/ws/2005/02/sc/sct</wst:TokenType>
<wst:RequestedSecurityToken>
<wsc:SecurityContextToken>
<wssu:Identifier> http://fabrikam123.com/SCTi
</wssu:Identifier>
</wsc:SecurityContextToken>
</wst:RequestedSecurityToken>
<wsp:AppliesTo> http://fabrikam123.com/CCi </wsp:AppliesTo>
<wst:RequestedAttachedReference>
<wsse:SecurityTokenReference >
<wsse:Reference
ValueType="http://schemas.xmlsoap.org/ws/2005/02/sc/sct"
URI="http://fabrikam123.com/SCTi"/>
</wsse:SecurityTokenReference>
</wst:RequestedAttachedReference>
<wst:RequestedUnattachedReference>
<wsse:SecurityTokenReference>
<wsse:Reference
ValueType="http://schemas.xmlsoap.org/ws/2005/02/sc/sct"
URI="http://fabrikam123.com/SCTi"/>
</wsse:SecurityTokenReference>
</wst:RequestedUnattachedReference>
<wst:RequestedProofToken>
<wst:BinarySecret
Type="http://docs.oasis-open.org/ws-sx/ws-trust/200512/SymmetricKey">
<!-- base64 encoded value -->
</wst:BinarySecret>
</wst:RequestedProofToken>
<wst:Lifetime>
<wssu:Created>2005-10-24T20:19:26.526Z</wssu:Created>
<wssu:Expires>2005-10-25T06:24:26.526Z</wssu:Expires>
</wst:Lifetime>
<wst:KeySize>256</wst:KeySize>
</wst:RequestSecurityTokenResponse>
</t:IssuedTokens>
<o:Security xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<u:Timestamp u:Id="_0">
<u:Created>2005-12-15T23:36:12.015Z</u:Created>
<u:Expires>2005-12-15T23:41:12.015Z</u:Expires>
</u:Timestamp>
</o:Security>
</s:Header>
<s:Body>
<wscoor:CreateCoordinationContextResponse>
<wscoor:CoordinationContext>
<wscoor:Identifier> http://fabrikam123.com/CCi
</wscoor:Identifier>
<wscoor:Expires>...</wscoor:Expires>
<wscoor:CoordinationType>...</wscoor:CoordinationType>
<wscoor:RegistrationService>
<a:Address>https://...</a:Address>
<a:ReferenceParameters> ...
</a:ReferenceParameters>
</wscoor:RegistrationService>
</wscoor:CoordinationContext>
</wscoor:CreateCoordinationContextResponse>
</s:Body>
</s:Envelope>
注册消息
下面的消息是注册消息。
使用 WSCoor 1.0 注册
<s:Envelope>
<s:Header>
<a:Action>http://schemas.xmlsoap.org/ws/2004/10/wscoor/Register</a:Action>
<a:MessageID>urn:uuid:ed418b86-a75e-4aea-9d4e-a5d0cb5c088e</a:MessageID>
<a:ReplyTo>
<a:Address>https://...</a:Address>
</a:ReplyTo>
<a:To>https://...</a:To>
<wsse:Security
s:mustUnderstand="1"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wssu:Timestamp wssu:Id="_0" >
<wssu:Created>2005-12-15T23:36:13.827Z</wssu:Created>
<wssu:Expires>2005-12-15T23:41:13.827Z</wssu:Expires>
</wssu:Timestamp>
<wsc:SecurityContextToken>
<wssu:Identifier>
http://fabrikam123.com/SCTi
</wssu:Identifier>
</wsc:SecurityContextToken>
<!-- supporting signature over the timestamp -->
<wsse:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#hmac-sha1"/>
<ds:Reference URI="#_0">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<ds:DigestValue>
alRzyhjLgoUOYoh8cx4n75eTcUk=
</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>YZYjnVvSOVasAQqQxaaviTSWtqI=</ds:SignatureValue>
<ds:KeyInfo>
<wsse:SecurityTokenReference
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Reference
URI="http://fabrikam123.com/SCTi"/>
</wsse:SecurityTokenReference>
</ds:KeyInfo>
</wsse:Signature>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wscoor:Register>
<wscoor:ProtocolIdentifier>...</wscoor:ProtocolIdentifier>
<wscoor:ParticipantProtocolService>
<a:Address>https://... </a:Address>
</wscoor:ParticipantProtocolService>
</wscoor:Register>
</s:Body>
</s:Envelope>
使用 WSCoor 1.1 注册
<s:Envelope>
<s:Header>
<a:Action>http://docs.oasis-open.org/ws-tx/wscoor/2006/06/Register</a:Action>
<a:MessageID>urn:uuid:ed418b86-a75e-4aea-9d4e-a5d0cb5c088e</a:MessageID>
<a:ReplyTo>
<a:Address>https://...</a:Address>
</a:ReplyTo>
<a:To>https://...</a:To>
<wsse:Security
s:mustUnderstand="1"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wssu:Timestamp wssu:Id="_0" >
<wssu:Created>2005-12-15T23:36:13.827Z</wssu:Created>
<wssu:Expires>2005-12-15T23:41:13.827Z</wssu:Expires>
</wssu:Timestamp>
<wsc:SecurityContextToken>
<wssu:Identifier> http://fabrikam123.com/SCTi
</wssu:Identifier>
</wsc:SecurityContextToken>
<!-- supporting signature over the timestamp -->
<wsse:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#hmac-sha1"/>
<ds:Reference URI="#_0">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</ds:Transforms>
<ds:DigestMethod
Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<ds:DigestValue> alRzyhjLgoUOYoh8cx4n75eTcUk=
</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>YZYjnVvSOVasAQqQxaaviTSWtqI=
</ds:SignatureValue>
<ds:KeyInfo>
<wsse:SecurityTokenReference xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Reference URI="http://fabrikam123.com/SCTi"/>
</wsse:SecurityTokenReference>
</ds:KeyInfo>
</wsse:Signature>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wscoor:Register>
<wscoor:ProtocolIdentifier>...</wscoor:ProtocolIdentifier>
<wscoor:ParticipantProtocolService>
<a:Address>https://... </a:Address>
</wscoor:ParticipantProtocolService>
</wscoor:Register>
</s:Body>
</s:Envelope>
使用 WSCoor 1.0 注册响应
<s:Envelope>
<s:Header>
<a:Action>
http://schemas.xmlsoap.org/ws/2004/10/wscoor/RegisterResponse
</a:Action>
<a:MessageID>urn:uuid:ed418b86-a75e-4aea-9d4e-a5d0cb5c088d</a:MessageID>
<a:RelatesTo>
urn:uuid:ed418b86-a75e-4aea-9d4e-a5d0cb5c088e
</a:RelatesTo>
<a:To>https://...</a:To>
<wsse:Security
s:mustUnderstand="1"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wssu:Timestamp>
<wssu:Created>2005-12-15T23:36:13.827Z</wssu:Created>
<wssu:Expires>2005-12-15T23:41:13.827Z</wssu:Expires>
</wssu:Timestamp>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wscoor:RegisterResponse>
<wscoor:CoordinatorProtocolService>
<a:Address>https://...</a:Address>
<a:ReferenceParameters>
...
</a:ReferenceParameters>
</wscoor:CoordinatorProtocolService>
</wscoor:RegisterResponse>
</s:Body>
</s:Envelope>
使用 WSCoor 1.1 的注册响应
<s:Envelope>
<s:Header>
<a:Action> http://docs.oasis-open.org/ws-tx/wscoor/2006/06/RegisterResponse
</a:Action>
<a:MessageID>urn:uuid:ed418b86-a75e-4aea-9d4e-a5d0cb5c088d</a:MessageID>
<a:RelatesTo> urn:uuid:ed418b86-a75e-4aea-9d4e-a5d0cb5c088e </a:RelatesTo>
<a:To>https://...</a:To>
<wsse:Security
s:mustUnderstand="1"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wssu:Timestamp>
<wssu:Created>2005-12-15T23:36:13.827Z</wssu:Created>
<wssu:Expires>2005-12-15T23:41:13.827Z</wssu:Expires>
</wssu:Timestamp>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wscoor:RegisterResponse>
<wscoor:CoordinatorProtocolService>
<a:Address>https://...</a:Address>
<a:ReferenceParameters> ... </a:ReferenceParameters>
</wscoor:CoordinatorProtocolService>
</wscoor:RegisterResponse>
</s:Body>
</s:Envelope>
两阶段提交协议消息
下面的消息与两阶段提交 (2PC) 协议相关。
使用 WSAT 1.0 提交
<s:Envelope>
<s:Header>
<a:Action>http://.../ws/2004/10/wsat/Commit</a:Action>
<a:To>https://...</a:To>
<wsse:Security
s:mustUnderstand="1"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wssu:Timestamp wssu:Id="_0" >
<wssu:Created>2005-12-15T23:36:13.827Z</wssu:Created>
<wssu:Expires>2005-12-15T23:41:13.827Z</wssu:Expires>
</wssu:Timestamp>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wsat:Commit />
</s:Body>
</s:Envelope>
使用 WSAT 1.1 提交
<s:Envelope>
<s:Header>
<a:Action>http://docs.oasis-open.org/ws-tx/wsat/2006/06</a:Action>
<a:To>https://...</a:To>
<wsse:Security
s:mustUnderstand="1"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wssu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wssu:Timestamp wssu:Id="_0" >
<wssu:Created>2005-12-15T23:36:13.827Z</wssu:Created>
<wssu:Expires>2005-12-15T23:41:13.827Z</wssu:Expires>
</wssu:Timestamp>
</wsse:Security>
</s:Header>
<s:Body xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<wsat:Commit />
</s:Body>
</s:Envelope>
应用程序消息。
下面的消息是应用程序消息。
应用程序消息请求
<s:Envelope>
<s:Header>
<!-- Addressing headers, all signed-->
<wsse:Security s:mustUnderstand="1">
<wssu:Timestamp wssu:Id="timestamp">
<wssu:Created>2005-10-25T06:29:18.703Z</wssu:Created>
<wssu:Expires>2005-10-25T06:34:18.703Z</wssu:Expires>
</wssu:Timestamp>
<wsse:BinarySecurityToken
wssu:Id="IA_Certificate"
ValueType="...#X509v3"
EncodingType="...#Base64Binary">
<!-- IA certificate -->
</wsse:BinarySecurityToken>
<e:EncryptedKey Id="encrypted_key">
<!-- ephemeral key encrypted for PA certificate -->
<e:ReferenceList xmlns:e="http://www.w3.org/2001/04/xmlenc#">
<e:DataReference URI="#encrypted_body"/>
<e:DataReference URI="#encrypted_CCi"/>
<e:DataReference URI="#encrypted_issuedtokens"/>
</e:ReferenceList>
</e:EncryptedKey>
<Signature xmlns="http://www.w3.org/2000/09/xmldsig#">
<!-- signature over Addressing headers, Timestamp, and Body -->
</Signature>
</wsse:Security>
<wsse11:EncryptedHeader >
<!-- encrypted wscoor:CoordinationContext header containing CCi -->
</wsse11:EncryptedHeader>
<wsse11:EncryptedHeader
<!-- encrypted wst:IssuedTokens header containing SCTi -->
<!-- wst:IssuedTokens header is taken verbatim from message #2 above, omitted for brevity -->
</wsse11:EncryptedHeader>
</s:Header>
<s:Body wssu:Id="body">
<!-- encrypted content of the Body element of the application message -->
<e:EncryptedData Id="encrypted_body"
Type="http://www.w3.org/2001/04/xmlenc#Content"
xmlns:e="http://www.w3.org/2001/04/xmlenc#">
...
</e:EncryptedData>
</s:Body>
</s:Envelope>
历史资料。此文对应 2019-08-18 的中文文档快照,适用产品版本和命令行为以原文为准。
来源与署名:Microsoft 和文档贡献者。固定版本原文。文档采用 CC BY 4.0,示例代码采用 MIT 授权。本站将 Markdown 转为 HTML,规范化链接,移除外部媒体和导航标记。
